How to apply a magnetic sticker
Applying a magnetic sticker correctly is easy, but good preparation is important. The surface must be clean, dry, flat, and suitable for magnetic application.
By carefully applying the magnetic sticker, you prevent creases, air bubbles, and poorly fitting edges. This also ensures the advertisement remains neat and professionally visible.
In this guide, we explain step by step how to correctly apply a magnetic sticker to your vehicle.
First, check the surface
Before applying the magnetic sticker, it's important to check if the chosen location is suitable. Not every body panel is automatically suitable for a magnet.
- Check if the surface is magnetic
- Preferably choose a flat body panel
- Remove dirt, dust, and other contaminants
- Ensure the surface is dry
- Check beforehand if the chosen size fits completely
How to apply a magnetic sticker
Take your time to align the magnetic sticker properly. Especially with larger sizes, it's wise to determine the position beforehand.
Clean the surface
Thoroughly clean the chosen body panel and remove dirt, dust, and other residues. Then allow the surface to dry completely.
Determine the position
Hold the magnetic sticker against the vehicle and determine its exact placement. Check that all edges fall within the suitable flat area.
Apply the sticker flat
Apply the magnetic sticker carefully, ensuring the entire surface makes contact with the bodywork.
Check the edges
Check all around to ensure the magnetic sticker lies flat everywhere and doesn't curl up or come loose anywhere.
Choose a good spot for your magnetic sticker
The best position depends on the vehicle, the chosen size, and the available magnetic area. Good placement not only ensures a neat appearance but also helps to make the advertisement optimally visible.
Sufficient flat surface
Choose a body panel on which the entire magnetic sticker can lie flat.
Clearly visible
Preferably place the advertisement on a clearly visible part of the vehicle.
No interfering edges
Avoid places where the magnetic sticker has to cross sharp body edges, seams, or strong curves.
Applying 30 × 45 cm
A compact size is easy to position on smaller available surfaces. Always check beforehand if the surface is sufficiently flat and magnetic.
View the 30 × 45 cm magnetic sticker as a compact option.
Applying 40 × 60 cm
With 40 × 60 cm, you have a larger advertising surface and at the same time a size that can be applied to many suitable body panels.
View the 40 × 60 cm magnetic sticker .
Pay extra attention to XL magnetic stickers
For larger sizes, it's even more important to carefully measure the available space beforehand. The entire magnetic sticker must be able to be placed flat and fully supported by the magnetic surface.
60 × 70 cm
A large advertising format for vehicles with sufficient available body space.
70 × 120 cm
An XL format of 0.84 m². For this size, check particularly carefully if the chosen body panel is large enough.
Measure first, then apply
A few minutes of measuring prevents you from choosing a size that doesn't fit well on the vehicle.
Check the magnetic sticker after placement
After you have applied the magnetic sticker, a quick check is important. Pay particular attention to the edges and corners and check that the sticker lies flat everywhere.
- Check that all edges are fully adhered
- Check that there are no creases or curling corners
- Check that the sticker is completely flat
- Check that the chosen position is clearly visible
- Check the sticker again before you start driving
Things to avoid
Incorrect placement can cause a magnetic sticker to adhere less well or cause problems during use. Therefore, pay attention to the following points.
Placing on dirt
Dirt between the magnet and the bodywork can prevent the sticker from adhering completely flat.
Too much curvature
Strongly curved or complex body panels are less suitable for large magnetic stickers.
Insufficient checking
Always check the entire sticker, especially the edges, before driving the vehicle.
Frequently asked questions about applying a magnetic sticker
How do I apply a magnetic sticker to my vehicle?
First, clean and dry the chosen surface. Then determine the correct position and place the magnetic sticker completely flat on the magnetic bodywork. Finally, check all edges and corners.
Does the surface need to be clean?
Yes. A clean and dry surface is important for good adhesion between the magnetic sticker and the bodywork.
Can I place a magnetic sticker on any car?
No. The chosen bodywork must be suitable for magnetic application and sufficiently flat for the chosen size. Always check the surface beforehand.
Can I apply a large magnetic sticker myself?
Yes. For larger sizes, it is advisable to determine the position well beforehand and work calmly, so that the magnetic sticker is applied completely flat.
What should I pay attention to when applying an XL size?
Mainly check if there is enough flat and magnetic space available. The entire magnetic sticker must be able to adhere well to the chosen surface.
Can a magnetic sticker go over a body seam?
It is better to choose a flat surface where the magnetic sticker does not have to go over interfering seams, sharp edges, or strong body shapes.
Do I need to check if the magnetic sticker is securely attached?
Yes. After placement, check all edges and corners around the entire magnetic sticker to ensure they are properly sealed before driving the vehicle.
Where can I find all sizes?
View the full MagneetPro collection for all available sizes.
Choose the size that fits your vehicle
First, check the available space and then choose the size that best suits your vehicle and design.
Ready to apply your magnetic sticker?
Choose the right size, check the available space, and carefully apply your MagneetPro magnetic sticker for a professional business look.
View all magnetic stickers